Before beginning the installation, thoroughly & completely read these instructions & the enclosed driver’s WARNING NOTICE. Affix the WARNING
I-FAA303 Pg 2Part # HB-P13BEItem # Description Qty Item # Description QtyP13UBE-CS CRUSH SLEEVE / 1.32 4 716X114FTB 7/16 X 1 1/4 FINE THRD BOLT
11. Remove the OEM upper A-arms using a 15mm socket.12. Disconnect the OEM tie rods from the OEM rack & pinion steering unit. (See Photo # 6
21. Remove the OEM brake line retaining brackets from each OEM upper A-arm using a 5/32” drill bit to remove the rivet head. (See Photo #
26. Attach the new Skyjacker upper A-arms to the OEM steering knuckles using the OEM hardware & a 13mm socket. (See Photo # 16)27. Install t
33. Install the new Skyjacker lower bumper bracket using the supplied 7/16” x 1 1/4” bolts, washers, nuts, OEM hardware, 15mm socket, &
Comments to this Manuals