Before beginning the installation, thoroughly & completely read these instructions & the enclosed driver’s WARNING NOTICE. Affix the WARNING
®• Steering Box Skid Plate Part # RRSP20• Heavy-Duty Tie Rod Tube Part # TR300• High Capacity Oil Pan (97-02 Models
Pg 2:
I-TJ4013B Pg 4
9. Remove the OEM 10mm bolt from inside the OEM bump stop cup. Install the new Skyjacker bump stop spacer & OEM bump stop cup using
17. Remove the OEM lower links & replace the OEM lower links with the new Skyjacker extended lower links (One side at a time). (See Photo
4. Lower the rear axle down to remove the OEM rear coil springs. Remove both the OEM coil springs & the OEM upper bump stops.
14. Tighten the rear track bar bolts on each end & the new bolt in the track bar relocation bracket. : On the Jeep Wrangler TJ
With the vehicle on the floor, cycle the steering lock to lock & inspect the steering, suspension, driveline, & brake line systems for prop
Comments to this Manuals