Skyjacker MS966 User Manual download pdf

99-02 GM K1500 4x4

Multiple Shock Kit

Part # MS966

MS966-UD1 MS966-UPPER DRIVER'S HOOP 1

MS966-UP2 MS966-UPPER PASSENGER HOOP 1

MS966-UB3L UPPER BOTTOM, LEFT, MS966 1

MS966-UB4R UPPER BOTTOM, RIGHT, MS966 1

MS966-LBB2 MS966-LOWER BOTTOM BRACKET 2

38X1TCFB 3/8 X 1 THRD-CUTTER FLG BLT 12

12X3FTB 1/2 X 3 FINE THREAD BOLT 1

142121 ES24 SLEEVE/402087 1.38" 4

12X312FTB 1/2 X 3 1/2 FINE THREAD BLT 9

38X212CTB 3/8 X 2 1/2 CTB 4

12FTN 1/2-20 FINE N/I LOCK NUT 12

38CTN 3/ 8-16 COARSE N/I LOCK NUT 4

12SAEW 1/2 SAE WASHER 22

38SAEW 3/8 SAE WASHER 8

STEM BUSH-SHK STEM BUSHING-SHOCK 4

1. Park the vehicle on flat level ground. Set the emergency brake

and properly block the tires.

2. Raise the front of the vehicle and support the frame rails using

jack stands. Remove the front tires. Remove the front shock

using 9/16 wrench and 21mm socket.

3. Hold the new Skyjacker Multiple shock bracket up and rest it

on top of factory bracket. Using a marker, draw around the

new bracket so that inner fender well can be cut. Remove the

bracket and trim along the line. Be careful not to damage any

wiring or lines located behind the fender well. (See Photo #1

and #2).

On the front bottom bracket, the center hole will line up with

existing hole in the frame (Photo #3). On the rear bottom

bracket, the upper rear hole will line up with existing hole

in the frame. (See Photo #4).

4.Hold the bracket back up on top of the factory bracket. Line the

center hole on the bracket up with the factory shock hole in the

factory bracket. Hold the bottom of the bracket up against the

frame and line up with factory holes in the frame. Mark the bot-

tom hole that is to be drilled. Remove bracket and drill using

5/16 drill bit. Once drilled, install bracket using the 3/8 thread

cutter bolt. Repeat this process in the lower hole on the other

side of bracket. (See Photo #3 and #4).

5. With one bolt installed per side, drill and install the other four

bolts on the lower mounts. (See Photo #5).

Photo #1

Photo #2

Photo #3

Photo #4

Photo #5

I-MS966 8-03 Pg 1

Part # Description Qty.

1 2

Summary of Contents

Page 1 - Part # MS966

99-02 GM K1500 4x4Multiple Shock Kit Part # MS966MS966-UD1 MS966-UPPER DRIVER'S HOOP 1MS966-UP2 MS966-UPPER PASSENGER HOOP 1MS966-UB3L UP

Page 2

Photo #66. With the six outer bottom bolts installed, mark and drill theupper outside hole to 13/32. It may be easier to drill first with a1/8 drill b

Comments to this Manuals

No comments

Skyjacker MS966 User Manual

Browse online or download User Manual for For the car Skyjacker MS966. Skyjacker MS966 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for For the car Skyjacker MS966