Skyjacker FA500 User Manual download pdf (Page 2)

Part # JA550 (With Power Steering) Part # JA552 (With Power Steering)

• 72-75 Jeep CJ (3"- 4" Lift) • 72-75 Jeep CJ (1.5"- 2.5" Lift)

Part # JA650 (With Manual Steering) Part # JA652 (With Manual Steering)

• 72-75 Jeep CJ (3"- 4" Lift) • 72-75 Jeep CJ (1.5"- 2.5" Lift)

Part # JA750 (With Power Steering) Part # JA770 (With Power Steering)

• 87-06 Jeep Wrangler TJ & YJ (4"- 6" Lift) • 07-up Jeep Wrangler JK (4"- 7" Lift)

Part # JA850 (With Manual Steering)

• 87-06 Jeep Wrangler TJ & YJ (4"- 6" Lift)

Figure # 3

Part # FA300 / FA500

(With Power Steering)

• 76-79 Ford F100 / F150 4WD

• 78-79 Ford Bronco

• 66-77 Ford Bronco

(With or Without Power Steering)

Note: The Skyjacker Part #'s FA300

& FA500 are OEM replacements.

However, on models equipped with

“Scissor Style” steering found on the

76-77 Ford F100 / F150 & Bronco. The drag link & tie rod assembly will require changing to the

“Straight Style” steering in order to install a drop pitman arm. (See Figure # 3)

Installation:

1. Remove the OEM tie rod from the OEM pitman arm & lower the tie rod.

2. Remove the OEM nut & washer from the output shaft of the OEM steering gear box.

3. Using a pitman arm puller, remove the OEM pitman arm from the OEM steering gear box & install

the new Skyjacker pitman arm using the OEM nut & washer.

4. Attach the OEM tie rod the new Skyjacker pitman arm using the OEM hardware. Note: If you

changed styles of steering, reset the toe-in / toe-out & tighten all tie rod assembly hardware.

5. Retorque all hardware after the first 100 miles.

I-PITMAN ARM Pg 2

Figure # 3

Scissor Style

Straight Style

Skyjacker FA500 User Manual Page 2